Sploder Forums

Sploder Archives => Sploder Mainsite Archives => Bugs => Topic started by: geoff on July 20, 2011, 02:26 am

Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 20, 2011, 02:26 am
Please post bugs here.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Zzron on July 20, 2011, 03:04 am
I made a little thingy and it didn't show up in the beta PPG maker.. :[

EDIT: Never mind, I forgot to publish it.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: liamnight on July 20, 2011, 05:51 am
I have no idea if this is a bug or anything but:

It seems like you're able to get to the graphics editor itself from the physics update
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: RoccoThePro on July 20, 2011, 08:40 am
In the Graphics creator, when ever I delete a frame, lets say I delete frame 2, I create another frame and the new frame says, frame 3. It's probably a very small bug, I just think it needs to be edited.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: wormwerk on July 20, 2011, 12:29 pm
I'm sorry to hear you have bugs.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: RoccoThePro on July 20, 2011, 12:44 pm
Posted By: wormwerkI can't see the graphics creator.
Because you have to be invited too or be an Editor or a Moderator.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 20, 2011, 01:39 pm
Posted By: rocco576In the Graphics creator, when ever I delete a frame, lets say I delete frame 2, I create another frame and the new frame says, frame 3. It's probably a very small bug, I just think it needs to be edited.


That's not a bug - the frames never change names, and never repeat names in the graphic.  This is to prevent confusion if you reorder the frames.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: RoccoThePro on July 20, 2011, 02:02 pm
Posted By: geoff
Posted By: rocco576In the Graphics creator, when ever I delete a frame, lets say I delete frame 2, I create another frame and the new frame says, frame 3. It's probably a very small bug, I just think it needs to be edited.


That's not a bug - the frames never change names, and never repeat names in the graphic.  This is to prevent confusion if you reorder the frames.
Oh, okay. Thanks geoff.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: memorycode on July 20, 2011, 03:02 pm
After I made a graphic, I tested it on the new physics maker. When I test it though, my computer went extra slow, frozen even, for several minutes. I was forced to close the browser so things would turn out normal again, but this bug doesn't make me confident using the graphic editor or the new maker just yet.

This happen using both the editor and the maker.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 20, 2011, 05:25 pm
What operating system and browser are you running?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: memorycode on July 20, 2011, 05:37 pm
Posted By: geoffWhat operating system and browser are you running?

Firefox
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: giovanny on July 20, 2011, 08:37 pm
Posted By: rocco576In the Graphics creator, when ever I delete a frame, lets say I delete frame 2, I create another frame and the new frame says, frame 3. It's probably a very small bug, I just think it needs to be edited.
Same for me...
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: 24man on July 20, 2011, 10:12 pm
Image and video hosting by TinyPic
^ a ugly bug I made
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: masterx22 on July 21, 2011, 12:12 am
earlier i was on the creator, but now it says i need an invite -_-

wtf. And i already triple checked that im logged in.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on July 21, 2011, 01:21 am
Posted By: masterx22earlier i was on the creator, but now it says i need an invite -_-

wtf. And i already triple checked that im logged in.


Find the thread in MSO.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: TURBOMAN5 on July 21, 2011, 04:33 am
Posted By: masterx22earlier i was on the creator, but now it says i need an invite -_-



I think that at first you weren't logged in.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on July 21, 2011, 01:03 pm
Some saved graphics don't appear when you visit the BETA PPG.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Chewy3001 on July 21, 2011, 01:36 pm
Why are non-coloured areas on the gifs filled in black? (This isn't for the PPG, the non-coloured bits there are fine).
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on July 21, 2011, 02:41 pm
Posted By: alexturner2002Some saved graphics don't appear when you visit the BETA PPG.

Did you make sure that you published the graphics?

Posted By: Chewy3001Why are non-coloured areas on the gifs filled in black? (This isn't for the PPG, the non-coloured bits there are fine).

Because they don't have a background, so it just defaults to black.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 22, 2011, 01:16 am
Posted By: Chewy3001Why are non-coloured areas on the gifs filled in black? (This isn't for the PPG, the non-coloured bits there are fine).


Because I was unable to get transparency to work reliably.  It's not really important for the GIFs because they are just previews and not used in the creator.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 22, 2011, 01:17 am
Posted By: memorycodeAfter I made a graphic, I tested it on the new physics maker. When I test it though, my computer went extra slow, frozen even, for several minutes. I was forced to close the browser so things would turn out normal again, but this bug doesn't make me confident using the graphic editor or the new maker just yet.

This happen using both the editor and the maker.


Does this happen every time?  What are you doing when this happens?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: ju44 on July 22, 2011, 04:35 pm
For some reason, when you test game with a character made from the graphics editor, invisible blocks you didn't put there appear, allowing you to go higher then normal, but also blocking you.  This is a square character, BTW.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: giovanny on July 22, 2011, 10:00 pm
Posted By: memorycodeAfter I made a graphic, I tested it on the new physics maker. When I test it though, my computer went extra slow, frozen even, for several minutes. I was forced to close the browser so things would turn out normal again, but this bug doesn't make me confident using the graphic editor or the new maker just yet.

This happen using both the editor and the maker.
My computer froze too...
I was using IE
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: deathleaf on July 23, 2011, 12:58 am
Geoff I found a bug when you make the actual game with something, when you put controls on something you make it gives you the choice to set if it walks normal/switch or in walk mode. But when I select walk mode it does switch around, but it would switch in the opposite direction. I.E I press left the animation looks right and visa versa.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 23, 2011, 01:08 am
Posted By: deathleafGeoff I found a bug when you make the actual game with something, when you put controls on something you make it gives you the choice to set if it walks normal/switch or in walk mode. But when I select walk mode it does switch around, but it would switch in the opposite direction. I.E I press left the animation looks right and visa versa.


Your original graphics should be facing right. If it is facing left, you'll need to go into the graphic editor and flip them all horizontally. SHIFT-click on the flip horizontal tool flips all layers at once.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: deathleaf on July 23, 2011, 01:17 am
Posted By: geoff
Posted By: deathleafGeoff I found a bug when you make the actual game with something, when you put controls on something you make it gives you the choice to set if it walks normal/switch or in walk mode. But when I select walk mode it does switch around, but it would switch in the opposite direction. I.E I press left the animation looks right and visa versa.


Your original graphics should be facing right. If it is facing left, you'll need to go into the graphic editor and flip them all horizontally. SHIFT-click on the flip horizontal tool flips all layers at once.


Thanks geoff I'll give it a go and say if it works. ;)
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: deathleaf on July 23, 2011, 01:24 am
Thank you geoff, it worked :)
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Gallade265 on July 23, 2011, 09:42 am
You can 'Like' your own graphic.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on July 23, 2011, 01:10 pm
When you create 100 or more frames by removing and adding them, It comes up with "Frame ..." Maybe it's because the bytes are too small to add 100.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on July 23, 2011, 01:56 pm
Posted By: ju44For some reason, when you test game with a character made from the graphics editor, invisible blocks you didn't put there appear, allowing you to go higher then normal, but also blocking you.  This is a square character, BTW.

I experienced this same problem with the large zoomed in field.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 23, 2011, 04:56 pm
Posted By: ju44For some reason, when you test game with a character made from the graphics editor, invisible blocks you didn't put there appear, allowing you to go higher then normal, but also blocking you.  This is a square character, BTW.


Not sure what you mean.  Can you make an example?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on July 23, 2011, 08:56 pm
Posted By: geoffNot sure what you mean.  Can you make an example?

I'll give an example. I created a square and gave it a graphic design. When I tried to test, the character square moved upwards a few inches and the character could only move a few inches to the right before it was stopped by an invisible wall. I experienced this problem only with the large, zoomed in field. I'm sorry if I didn't explain it well enough.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on July 23, 2011, 09:50 pm
Another bug that I noticed was that graphic creations have no collision layers. I tried making a game where the player has to walk around a wall, but instead, the character walks right through it. Both the wall and the character have all collision layers on and no pass-thru layers.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: supernova101 on July 23, 2011, 11:23 pm
When I connect a (graphics made) item to a elevator-moving shape with the connector, the player can walk right through the graphics made item connected to the elevator. D:)

Aaand I checked the collision layers just to make sure, and none where removed.. :/

I'll post an example if you want.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: supernova101 on July 23, 2011, 11:24 pm
And I think Lumberjays post has to do with the same problem that mine has.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 23, 2011, 11:58 pm
Posted By: lumberjay
Posted By: geoffNot sure what you mean.  Can you make an example?

I'll give an example. I created a square and gave it a graphic design. When I tried to test, the character square moved upwards a few inches and the character could only move a few inches to the right before it was stopped by an invisible wall. I experienced this problem only with the large, zoomed in field. I'm sorry if I didn't explain it well enough.


Please post an example.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 23, 2011, 11:58 pm
Posted By: supernova101When I connect a (graphics made) item to a elevator-moving shape with the connector, the player can walk right through the graphics made item connected to the elevator. D:)

Aaand I checked the collision layers just to make sure, and none where removed.. :/

I'll post an example if you want.


Yes, please.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on July 24, 2011, 12:29 am
Posted By: geoffPlease post an example.

Sorry, but what do you mean exactly?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: supernova101 on July 24, 2011, 12:33 am
Posted By: geoff
Posted By: supernova101When I connect a (graphics made) item to a elevator-moving shape with the connector, the player can walk right through the graphics made item connected to the elevator. D:)

Aaand I checked the collision layers just to make sure, and none where removed.. :/

I'll post an example if you want.


Yes, please.


Okay: http://www.sploder.com/publish.php?s=d0024ddq

This is without any collision layers removed.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on July 24, 2011, 12:40 am
Okay... It seems that it will not allow me to publish the game to show an example, even though I published a game earlier.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 24, 2011, 12:59 am
??? Why won't it let you publish a game?  What error do you get, if any?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 24, 2011, 01:04 am
supernova101http://www.sploder.com/publish.php?s=d0024ddq


This doesn't collide because the guy sliding back and forth is attached with a connector.  Child objects in a connector connection do not collide.  Simply put the elevator directly on the guy.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: supernova101 on July 24, 2011, 01:14 am
Does this have to do with the graphics...?

This didn't happen with previous shapes before the update.....

Anyway, alright, thanks for clearing that up.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 24, 2011, 01:32 pm
It was always this way.  In your case, try using a pinjoint instead of a connector.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: spencerrocks on July 24, 2011, 02:24 pm
Geoff this is a really weird bug. I can never click walk mode. Its faced to the right. My browser is google chrome. And a question. How do you like a graphic?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on July 24, 2011, 02:34 pm
Posted By: geoffWhat error do you get, if any?

No error pops up. I simply press the publish button and it doesn't do anything.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 24, 2011, 09:03 pm
Huh? Are you logged in?  Do other games publish? Use the clipboard to copy the level info and paste it here.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 24, 2011, 09:04 pm
Posted By: spencerrocksGeoff this is a really weird bug. I can never click walk mode. Its faced to the right. My browser is google chrome. And a question. How do you like a graphic?


Save your game, let me know the name, and tell me which object you are trying to do this with.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on July 24, 2011, 09:23 pm
Posted By: geoffHuh? Are you logged in?  Do other games publish? Use the clipboard to copy the level info and paste it here.

I managed to publish, although it would not allow me publish on the level where the bug occurs. It happens on level three. It is the zoomed in field and it is not finished. There is a block to jump over. Jump and land on the block and continue walking to see some of the glitches.
NOTE: The block in level three is supposed to be immobile.
Here.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 25, 2011, 02:37 am
@lumberjay - do you mean how if you approach the block, you are stopped?  That's because the object you placed the graphic on is a square. The collision shape is not trimmed to fit the graphic. I recommend you use a rectangle instead of a square for your character. That way, you can adjust the collision shape to match the aspect ratio of your graphic.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on July 25, 2011, 12:25 pm
Posted By: spencerrocksGeoff this is a really weird bug. I can never click walk mode. Its faced to the right. My browser is google chrome. And a question. How do you like a graphic?


If the graphic does not have 2 frames or more then Walk Mode will not work.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on July 25, 2011, 02:48 pm
Posted By: geoff- do you mean how if you approach the block, you are stopped?

I wish that was the problem, but no. When you jump over the block, the block will start to move in a different direction even though it is meant to stay in place. Also, upon moving past the block, you will be stopped by a nonexistent wall.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 25, 2011, 08:16 pm
Are you sure it's not just the camera following your character that is giving you this impression?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on July 25, 2011, 09:58 pm
Posted By: geoffAre you sure it's not just the camera following your character that is giving you this impression?

O_O
Gah!
*Facepalm*
So obvious. I feel ridiculous for not thinking of that obvious answer.
Sorry for wasting your time.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 25, 2011, 10:45 pm
Hahaha... too funny.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Zzron on July 26, 2011, 06:36 am
Uhmm. I can't publish my game with graphics in it. I click the button and nothing happens.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 26, 2011, 12:44 pm
Is the text in the Publish button white? What I mean is, is the button active?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on July 26, 2011, 12:55 pm
Do you happen to only have one object in your game? It appears that if you only have one object in your game, the publish button doesn't work...
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: supersain on July 26, 2011, 02:41 pm
I cant use the flood fill the brush or the eraser if i have somthing selected  with the selection tool
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Zzron on July 26, 2011, 06:30 pm
Posted By: geoffDo you happen to only have one object in your game? It appears that if you only have one object in your game, the publish button doesn't work...

That's the problem then!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: gamefreak20 on July 26, 2011, 11:43 pm
i don't know why but while i was making a game using my custom graphics in the physics game, i made the main character spawn out his projectile and it would work fine sometimes but sometimes after i kill the first ninja the whole game freezes (it sometimes does it when u kill the second one too). i don't know if the graphics have something to do with it but it only started happening since the graphics creator has been out and it has only happen when i use custom graphics!! Here is the link to the game:
http://www.sploder.com/publish.php?s=d0024d9q
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on August 01, 2011, 11:45 am
For some reason, if a graphic is set to walk mode, and it is on an elevator/slider it will walk when it isn't moving.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on August 01, 2011, 02:47 pm
Posted By: supersainI cant use the flood fill the brush or the eraser if i have somthing selected  with the selection tool


You can only use those tools within the selection area.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on August 02, 2011, 01:08 am
I think it's because of the function between the player and the block being controlled automatically in the same way. It probably lags up.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Neutralization on August 03, 2011, 01:30 pm
Drawing something then copying the hex code directly into the box from somewhere else will select that color, but ghostly remove all other pixels drawn already. They appear to yet exist, but moving the mouse over them and causing them to be redrawn (in graphics driver), will later show that they are absent.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: masenko on August 05, 2011, 12:42 am
I deleted one of my Mario graphic and it hasn't actually been deleted. When I check my graphics page it isn't there, but when I look on the graphics tab on my public profile it is still there. And when I look for it in the physics puzzle graphics bar, it is still there.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on August 06, 2011, 01:19 am
hmm.. i'll look into it.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on August 06, 2011, 03:08 pm
If I delete a graphic which is the same as the other, they both get deleted.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on August 07, 2011, 03:20 am
The same as what other?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on August 07, 2011, 12:28 pm
If I publish a graphic, then save it as a different project, I go to delete one and I've deleted both.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on August 07, 2011, 03:19 pm
That simply isn't the case. Are you sure you just didn't publish the second one?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on August 08, 2011, 02:23 am
I published both and I deleted one of them and I've deleted both.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on August 08, 2011, 03:47 am
Well, I don't know what to say. There's really no way this can happen without you actually deleting each one. The system is designed to delete one at a time. It simply cannot delete more than one graphic at a time. It's not possible.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on August 08, 2011, 12:44 pm
Posted By: geoffWell, I don't know what to say. There's really no way this can happen without you actually deleting each one. The system is designed to delete one at a time. It simply cannot delete more than one graphic at a time. It's not possible.


Maybe I forgot to save it as a different project.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: legoguy98 on August 14, 2011, 12:58 pm
I guess this could be a bug,I wanted to make something move with a thruster and have an adder but I don't want the adder to move.Basically like enemy's are repeatedly coming out a castle an walking but the bit that adds new stuff moves as well.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Dbub10 on August 14, 2011, 11:27 pm
I once had a glitch on my game and the player was made to slide, but then it like spazzed out and fliped around and I don't know what happened.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on August 16, 2011, 05:42 am
Posted By: legoguy98I guess this could be a bug,I wanted to make something move with a thruster and have an adder but I don't want the adder to move.Basically like enemy's are repeatedly coming out a castle an walking but the bit that adds new stuff moves as well.


Make the object static.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: legoguy98 on August 17, 2011, 03:23 am
Thanks.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: legoguy98 on August 17, 2011, 03:25 am
Posted By: geoffWell, I don't know what to say. There's really no way this can happen without you actually deleting each one. The system is designed to delete one at a time. It simply cannot delete more than one graphic at a time. It's not possible.
Maybe I was a glitch with the browser,we seem to have slot of those recently.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Startrekzooka on August 17, 2011, 08:59 am
There's a glitch in the Graphics Editor when you let it move in frame, after you publish it, you wont see the graphic move.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on August 21, 2011, 03:44 am
For some reason if an exported graphic with 2 or more frames is uploaded on Tinypic and you put it on the forums then it only shows the first frame when you start the discussion. But afterwards it works fine.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: theravicale on September 02, 2011, 05:49 pm
Rotated objects in the phsyics puzzle creator become out-of-place when you test or play the game.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on September 03, 2011, 01:34 am
The bug is fixed.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: theravicale on September 03, 2011, 10:07 am
Posted By: alexturner2002The bug is fixed.
the one I posted isn't (and I clear my cache all the time)
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: swallowthesun on September 03, 2011, 02:51 pm
Hey Geoff, I've been experiancing a lot of problems with the PPG creater....

For example, I made a character from the graphics creater, posted him in the game, and a strange invisible wall appeared in front of him that I didn't make......

Another thing are my levels keep disapearing. I will make them, publish the game, and a few minutes later, I'll have to publish the updated version again because the newer levels vanish.

If I add two 'physics' to an object, it locks and can no longer move untill I take one of them off it.

Help?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: legoguy98 on September 06, 2011, 04:07 am
Posted By: swallowthesunIf I add two 'physics' to an object, it locks and can no longer move untill I take one of them off it.
If you add a bouncer, it will lock, and if you get a wall you just have to jump (I get that a lot).
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Jagger on October 07, 2011, 12:17 pm
Whenever I delete a graphic, It still shows on my page.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on October 09, 2011, 02:09 am
Posted By: swallowthesunHey Geoff, I've been experiancing a lot of problems with the PPG creater....

For example, I made a character from the graphics creater, posted him in the game, and a strange invisible wall appeared in front of him that I didn't make......

Another thing are my levels keep disapearing. I will make them, publish the game, and a few minutes later, I'll have to publish the updated version again because the newer levels vanish.

If I add two 'physics' to an object, it locks and can no longer move untill I take one of them off it.

Help?


That was another copy off your thread.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: filiptokic on October 10, 2011, 10:13 am
Posted By: 101AJWhenever I delete a graphic, It still shows on my page.
Yes, that I hate two!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: liamnight on October 11, 2011, 02:54 am
For the physics creator: When you make it so that an adder shoots with mouse, at the published game it shows in the "help" saying that you shoot with spacebar.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: legoguy98 on October 30, 2011, 06:30 pm
Posted By: liamnightFor the physics creator: When you make it so that an adder shoots with mouse, at the published game it shows in the "help" saying that you shoot with spacebar.
I think the help bit is a guide that edits when you change the effects of object(s) in your game, it probably doesn't edit when you change the settings for the stuff you add onto the object(s), though.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: ilikesplotergame on November 10, 2011, 06:50 am
Uh, Geoff, I think I just don't work it right, but when I put a connect on two objects, it sometimes either spins around the screen so fast that you can hardly see it, or glitch up and disappear.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: gamefreak20 on November 11, 2011, 02:40 pm
While making a game, i put an adder on an object next to another (the concept is that the object is shot by the character). Both had custom graphics on it and i was trying out another concept with them. when i tested it, i would shoot and the object would spawn in the right direction towards the right but when i would try to shoot it to the left, the object would spawn to right, the same direction as i would shoot it if i was facing to the right. I don't know if its a graphics problem or the other new concept is what is causing it.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: benisaewsome on November 11, 2011, 09:44 pm
Posted By: gamefreak20While making a game, i put an adder on an object next to another (the concept is that the object is shot by the character). Both had custom graphics on it and i was trying out another concept with them. when i tested it, i would shoot and the object would spawn in the right direction towards the right but when i would try to shoot it to the left, the object would spawn to right, the same direction as i would shoot it if i was facing to the right. I don't know if its a graphics problem or the other new concept is what is causing it.
I, too. Have experienced this. I'm not sure if it's a glitch or just because the spawner direction doesn't change with the flip mode.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: jeff385 on December 04, 2011, 08:36 am
Deleted graphics are still appearing on my MS page when you click 'Graphics' below awards.
I tried refreshing, but nothin' happened.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: al3xhw on December 10, 2011, 01:04 pm
I can't test my game. I'm working on a brilliant game and every time I reach a certain point the game glitches and the screen zooms to the top corner. It is really annoying and makes me unsure if my physics notions are going to work.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on December 12, 2011, 02:05 pm
Can you post a link to the game along with instructions on how to replicate the bug?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alex131 on December 12, 2011, 02:43 pm
Sign Up To The Game Factor Now By Searching 'The G Factor - SIGN UP NOW!' Discussion, Thankyou, Maybe You Could Get Ya Game Skills On In This Gameshow, Geoff?

Thanks,

alex131
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on December 13, 2011, 03:33 am
Please don't hijack threads or spam. Thanks.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alex131 on December 13, 2011, 12:36 pm
uh... soz geo! but ya could come n join eh? why not!?!?!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: shadowblade791 on December 14, 2011, 11:16 pm
Posted By: alex131uh... soz geo! but ya could come n join eh? why not!?!?!

its geoff.....RESPECT HIM!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Him on December 29, 2011, 10:12 am
Removed.
I forgot to lock the other blocks and add the same sensor layer.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Champ154 on January 12, 2012, 04:55 pm
DBOT
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: al3xhw on January 12, 2012, 05:09 pm
Posted By: Champ154DBOT
Oh dear...
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Jaggertoo on January 14, 2012, 03:40 am
Posted By: Champ154DBOT


-_-
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Xploder9000 on January 16, 2012, 05:32 pm
I've got a bug, when I deleted my graphic, then I go to my page, I clicked GRAPHICS and then, my deleted graphic still shows up, it must be fixed or something. it happens to my brother too. D:
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: casper11 on January 21, 2012, 07:18 pm
Posted By: Xploder9000I've got a bug, when I deleted my graphic, then I go to my page, I clicked GRAPHICS and then, my deleted graphic still shows up, it must be fixed or something. it happens to my brother too. D:
It just takes time to disappear. It may take a few refreshes but it will be gone.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Bizzmoff Jr. on January 22, 2012, 09:52 am
Posted By: Champ154DBOT

Geoff fused this thread for the following reason: To allow people to tell him about any problems they encounter, so he can fix those obstacles! People can still post here!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: casper11 on January 22, 2012, 12:35 pm
Posted By: Bizzmoff Jr.
Posted By: Champ154DBOT

Geoff fused this thread for the following reason: To allow people to tell him about any problems they encounter, so he can fix those obstacles! People can still post here!
He was hacked. He knows.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: jet50 on February 05, 2012, 07:30 pm
Most WASD characters get 1000+ jumps. The maximum should be triple jumps.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: mrezman on February 09, 2012, 05:45 pm
In the platformer, characters can easily fly out of a single layered wall when pushed against it.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: theravicale on February 12, 2012, 12:40 am
Posted By: jet50Most WASD characters get 1000+ jumps. The maximum should be triple jumps.
sadly this is caused by the script for jumping, it has to work with the engine D:
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: kazar14 on February 17, 2012, 08:03 am
i have already posted this on geoffs page, but i cannot find it. in physics puzzle game maker, my platform seems fine and my player seems fine, but my player keeps falling halfway through the platform and shaking from side to side so that i cannot move. please help and offer suggestions!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: clubpenguinman on February 23, 2012, 11:22 pm
(I won't be checking for a reply)

I got this really weird error, I think it was after I saved a game I'm still making that happens to be a physics game (btw it's really cool)

Here's what it looks like. It also scrolls to the right A LOT. In the homepage it really interferes

http://i1163.photobucket.com/albums/q547/PictureCoder72/sploder_err.jpg
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: mrezman on March 03, 2012, 03:44 pm
On my ppg,
http://www.sploder.com/games/members/mrezman/play/bubble-kingdom-demo/
on the second level the puzzle pieces go up with some invisible force! it's so annoying!!! STOP
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: tobestertobes on March 11, 2012, 07:50 pm
For some reason, when I put the dragging feature on an object, I then test it and it won't work.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: lumberjay on March 11, 2012, 08:55 pm
Posted By: tobestertobesFor some reason, when I put the dragging feature on an object, I then test it and it won't work.

Check to make sure the object isn't locked in place.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: jet50 on March 17, 2012, 11:15 pm
What's with the lines around graphic characters?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: jet50 on March 17, 2012, 11:15 pm
Bump
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: al3xhw on March 18, 2012, 01:29 pm
Posted By: jet50Bump
-.-
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: applepieofdooms (da OG sucka) on March 19, 2012, 04:36 am
Posted By: al3xhw
Posted By: jet50Bump
-.-

.,.
Smaller!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: al3xhw on March 20, 2012, 03:37 am
:D
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: sploderfaced on April 06, 2012, 02:27 pm
Hey, Geoff, I know a really annoying bug involving opacity in graphic creator. Sometimes, when I try do draw with a transparent line, when I click after adjusting the opacity it resets it to fully opaque. Can you find a way to fix it? Thanks, you are so awesome! =D
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: supersain on April 06, 2012, 08:35 pm
There are some inapropriate graphics tagged with the word "geoff"
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: greatzgames on April 07, 2012, 11:33 am
When I use the launcher control and I use it to make a player jump after he lands on an nonbouncer place he bounces automatically. When he is on a bouncer place he does not bounce. It eventually stops some how.

Step 1: Make floor with launcher cover half of play field
Step 2: Make second floor with nothing cover other half
Step 3: Make square player with mover and steel material
Step 4: In creator go to middle of 2 floors and bounce 2 or so times
Step 5: Watch player bounce nonstop

Link
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexmd on April 08, 2012, 05:13 pm
Whenever I give out my name some brown bear appears, help?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Sploderking27 on April 09, 2012, 04:40 pm
Posted By: alexmdWhenever I give out my name some brown bear appears, help?


He may be the Pedo Bear? Not joking lol.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexmd on April 10, 2012, 04:18 am
Posted By: Sploderking27
Posted By: alexmdWhenever I give out my name some brown bear appears, help?


He may be the Pedo Bear? Not joking lol.
O.o
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Mr. Numbers on April 10, 2012, 07:23 am
Geoff, in the physics creator there is a bug where you get 2 floors or objects and use the connect and one of the floors you go through!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: theravicale on April 15, 2012, 01:18 am
Posted By: alex68354027Geoff, in the physics creator there is a bug where you get 2 floors or objects and use the connect and one of the floors you go through!
that is because you are using the connect tool incorrectly, its for objects you are spawning in to be connected to a source object but what comes out of it is seperate
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: sausage0 on April 21, 2012, 06:47 am
1. You Can Actually Post Awards To Yourself
2. Physics maker bug:
When Making Motors If You Spin It INTO A SOLID OBJECT it gets stuck
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: trippwiesner on May 04, 2012, 10:51 pm
HOW DO YOU PIN OBJECTS IN THE BACKGROUND IN THE PHYSICS PUZZLE MAKER?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: PitfulHuman on May 05, 2012, 12:27 am
Posted By: trippwiesnerHOW DO YOU PIN OBJECTS IN THE BACKGROUND IN THE PHYSICS PUZZLE MAKER?


He said to post BUGS here. Not questions. Did you even read Geoff's post on the first page?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Eimonn on May 12, 2012, 03:09 pm
I put a coin in one of my games, but when I tested it, the coin fell through the ground!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Tudy on May 13, 2012, 04:36 am
Posted By: eimonnI put a coin in one of my games, but when I tested it, the coin fell through the ground!

That because you didn't fix it in nails and it hasn't got any layer... btw why do you use prefabs?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Mr. Numbers on May 14, 2012, 03:39 pm
I make coins myself, for some odd reason. I draw a circle, add score on sensor, add a passthru layer and lastly a sensor layor!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alexturner2002 on May 15, 2012, 12:18 pm
Posted By: alex68354027I make coins myself, for some odd reason. I draw a circle, add score on sensor, add a passthru layer and lastly a sensor layor!


Is that even a bug?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: colalollies8982 on May 19, 2012, 05:53 am
Posted By: alexturner2002
Posted By: alex68354027I make coins myself, for some odd reason. I draw a circle, add score on sensor, add a passthru layer and lastly a sensor layor!


Is that even a bug?


no
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: koolkid10437 on May 19, 2012, 01:49 pm
When I press copy it doesn't copy to the clipboard?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: jet50 on May 19, 2012, 06:49 pm
Posted By: alex68354027I make coins myself, for some odd reason. I draw a circle, add score on sensor, add a passthru layer and lastly a sensor layor!


Ummmmmmm.....not a bug
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: mrperson12999 on May 24, 2012, 12:57 am
Posted By: koolkid10437When I press copy it doesn't copy to the clipboard?


Same here. It's really frustrating for games that just hand out intros.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: epicblast17 on May 24, 2012, 04:54 pm
Image and video hosting by TinyPic aaaahhh a bug ate my graphic
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: NPC on May 25, 2012, 06:04 pm
Sometimes, when I add an object in the Physics maker, lock it, and click "test," it ends up on the other side of the screen.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: matthade2 on May 25, 2012, 10:06 pm
I have been having problems when i go into physics puzzle maker I can't seem to load this one game..To make this even more confusing the other game I have will load just fine but the other still won't.. I think what I did was it was somehow trying to save and I clicked out of it accidentally but I saved a couple of times before this so why won't this game load?
(note: these are both unpublished games!)
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: #justforfun on May 27, 2012, 10:32 am
Posted By: epicblast17Image and video hosting by TinyPicaaaahhh a bug ate my graphic


-_-
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: #justforfun on May 28, 2012, 07:25 am
Posted By: eimonnI put a coin in one of my games, but when I tested it, the coin fell through the ground!


Did you remove Collision Layers?
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Master on June 09, 2012, 01:48 pm
you can't put graphics on the platformor creator but on the phisics you can
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Master on June 09, 2012, 01:51 pm
Posted By: mrperson12999
Posted By: koolkid10437When I press copy it doesn't copy to the clipboard?

Same here. It's really frustrating for games that just hand out intros.


you should press (Ctrl)-V then click copy to clip board
-_-'
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Master on June 09, 2012, 01:55 pm
...
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Master on June 09, 2012, 02:04 pm
i read pleaS post your bugs here on the first message OK
i will
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Master on June 09, 2012, 02:04 pm
your bugs here
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Master on June 09, 2012, 02:05 pm
h........................................................
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Master on June 09, 2012, 02:08 pm
ummmmm on the phisics creator
everytime you put a launcher on an object it locks the object if you unlock it..it locks itself again
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: applepieofdooms (da OG sucka) on June 09, 2012, 10:54 pm
Master106 please do not spam.
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: kylepeanut12 on June 17, 2012, 02:39 pm
Posted By: master106ummmmm on the phisics creator
everytime you put a launcher on an object it locks the object if you unlock it..it locks itself again


That's not really a bug, the launcher requires your object to be locked...
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: kor11isgreat on June 26, 2012, 02:50 pm
Posted By: epicblast17Image and video hosting by TinyPicaaaahhh a bug ate my graphic
thats not a bug its a graphic
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: kor11isgreat on June 26, 2012, 02:51 pm
Posted By: kor11isgreat
Posted By: epicblast17Image and video hosting by TinyPicaaaahhh a bug ate my graphic
thats not a bug its a graphic

but its still funny!
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: kor11isgreat on June 26, 2012, 02:55 pm
it shows up a kind of object that is tweaked and when like it flies of the screen
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Rubber Ducky on July 03, 2012, 07:11 am
When I delete a graphic, it isn't deleted. When I click load on the graphic editor, it isn't there. But when I open my profile, I see my deleted graphic. So, it's deleted in the graphic editor, but it isn't deleted on my profile.
Lol but anyway, when I want to delete a graphic I just private it. xD
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: kylepeanut12 on July 03, 2012, 12:59 pm
Posted By: MilkingWhen I delete a graphic, it isn't deleted. When I click load on the graphic editor, it isn't there. But when I open my profile, I see my deleted graphic. So, it's deleted in the graphic editor, but it isn't deleted on my profile.
Lol but anyway, when I want to delete a graphic I just private it. xD


Just private it until you can find a way to delete it. xD
Title: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: poshtoffee on July 06, 2012, 01:11 pm
nothing yay!
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Jackboymogura123 on August 09, 2012, 11:44 am
On this user's profile, there is a serious bug saying he has over 65,000 games, and he has like only 250 games. Look at the link, preston70 and magmion actually have the most games on Sploder:
http://www.sploder.com/games/members/minimario123/
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alon on August 09, 2012, 06:52 pm
On this user's profile, there is a serious bug saying he has over 65,000 games, and he has like only 250 games. Look at the link, preston70 and magmion actually have the most games on Sploder:
http://www.sploder.com/games/members/minimario123/

Lol, they're privated.
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: AlexJT1 on August 09, 2012, 09:35 pm
I use Internet Explorer.
When I try creating a double of objects, it doesn't respond befor it's loaded and the more I try to create a double of, the longer it takes to wait.
The technique of creating doubles is very useful but because of that problem it's annoying.
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: flid on September 27, 2012, 06:46 pm
When I put a sensor thing to get a point, it got a point but caused it to lose the game. The glitch is in this game. http://www.sploder.com/games/members/flidsyufi/play/fire-boy-and-water-girl/
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: flid on September 27, 2012, 06:50 pm
When I put a sensor thing to get a point, it got a point but caused it to lose the game. The glitch is in this game. http://www.sploder.com/games/members/flidsyufi/play/fire-boy-and-water-girl/
That is how I found out about it.
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: kalaco on October 11, 2012, 11:38 am
when you put a pass through layer on a bouncer object the bouncer modifier does not work
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Bizzmoff Jr. on October 15, 2012, 06:48 pm
When I have one life in the PPG, and I activate a Lose Life AND an Add Life at the exact same time, it says, "Time Limit Reached!" Problem is, THERE'S NO TIME LIMIT!!! Even worse, I did it once a long time ago, and it worked!
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: flid on October 23, 2012, 05:49 pm
I made an item in the middle of the playfield and when I tested it, it apeared in the top left corner and wouldn't move.
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: cappuccino on November 29, 2012, 09:51 pm
Sometimes, when I save and publish my game on a specific level (Not the first level.), the thumbnail shows the first level. What do I need to do?
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: cappuccino on November 29, 2012, 10:17 pm
Sometimes when you put a graphic on a square object then you enlarge the square object a little, the graphic became blurry. Are graphics meant to be small so they would be clear?
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: cappuccino on November 29, 2012, 10:25 pm
On this user's profile, there is a serious bug saying he has over 65,000 games, and he has like only 250 games. Look at the link, preston70 and magmion actually have the most games on Sploder:
http://www.sploder.com/games/members/minimario123/
This has nothing to do with the topic.
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Hjawesomeness on December 22, 2012, 05:20 pm
ok
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Hjawesomeness on December 22, 2012, 05:20 pm
if i come across any bugs ill post them here
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Bahamut on December 24, 2012, 03:34 pm
When I make a bullet action (i.e make a bullet and a player with a flip mode graphic and connect it together) I put the bullet's adder where the player's direction is and I test it but when I go the opposite direction of where the player is, the adder points at the direction where the player is pointing but the bullet is being shot at it's former direction when the player goes left, fix this please.
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Master on January 26, 2013, 03:12 pm
Please post bugs here.
okay! (http://4.bp.blogspot.com/-umkhlvcYwnA/UDiaz7WaZjI/AAAAAAAADrk/OYtp5X1cFWY/s1600/Bugs%2BBunny.jpg)
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Master on February 09, 2013, 02:16 pm
I found a bug on the graphics thing in the phisics puzzle maker

(http://oi45.tinypic.com/21bxbr.jpg)
                    ^
What is this    |
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Bahamut on February 10, 2013, 12:27 pm
okay! (http://4.bp.blogspot.com/-umkhlvcYwnA/UDiaz7WaZjI/AAAAAAAADrk/OYtp5X1cFWY/s1600/Bugs%2BBunny.jpg)
Hey, you literally posted bugs. But seriously, get on topic! >:(
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: mercurios on March 06, 2013, 12:35 pm
yep that happens to me but i have chrome , every psyhic game creator game is running slow for me , the first seconds and then it runs normaly but then again when a new level starts...it al goes over and over
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: X on June 07, 2013, 06:16 pm
Since the Platformer Graphic Support Update, you can't make any frames, as if it's inaccessible.
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: alon on June 07, 2013, 06:38 pm
Since the Platformer Graphic Support Update, you can't make any frames, as if it's inaccessible.

That's only with 60x60 I believe.
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: X on June 07, 2013, 07:18 pm
That's only with 60x60 I believe.
It is?!?!?! Wow... I just spent 1 1/2 hours making an extremely detailed character in 60x60.
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: geoff on June 07, 2013, 07:26 pm
You can add frames only for smaller graphics sizes, not 60x60.
Title: Re: Graphics Editor and Physics Maker (Graphics-related) Bugs
Post by: Master on June 10, 2013, 08:51 am
You can add frames only for smaller graphics sizes, not 60x60.
I think that should change.